BedRug Bed Mats are the easiest to install custom fit bed protection for
your truck it is custom designed to fit your specific year make and model.
Installation doesn't require any tools and the bed mat works with factory truck
beds as well as drop in and spray-in liners. Remove the bed mat from box and
place face down on a clean dry surface. Leave the mat in the warm sun to help
flatten. Apply the dual-lock tape to the strips on the bed mat, making sure to
leave the backing on the adhesive. Before placing the bed mat in truck bed, be sure
to remove all debris and clean the surface with soap and water. Tor optimal
adhesion, be sure truck bed is above 68 degrees Fahrenheit. Place the bed mat in
the bed of the truck. With the mat position for best fit roll one side back
and use alcohol to clean all areas where tape will be adhered. If you have a spray
in liner, apply the adhesive promoter and allow to dry. Remove the backing from the
dual-lock tape, making sure to leave the hook and loop attached to bed mat. Press
mat firmly into place. Repeat the process on the remaining side. To install the
optionally available bedrug tailgate mat, place upside down and apply the hook
fastener tape to the appropriate location.
Do not remove tape backing at this time. Be sure to clean all surfaces that will
have adhesive applied with soap and water. Then, use another rag to clean with
alcohol. Use adhesive promoter on any plastic surfaces that will have adhesive
attached. Do not apply to painted metal, Allow promoter to dry. Remove tape
backing from the tailgate back. Position bed mat into place and press firmly to
adhere to truck bed. The bed mat installation is now complete.
providing impact and slip resistant protection for your truck bed that can
be cleaned with a power washer hose or a vacuum. It fills in the ribs and contours
of the truck bed to provide a smooth void-free loading surface that is easy
on your knees. If you would like more info, or if you have any questions, please
visit bedrug.com.
No comments:
Post a Comment