Vividline's Smoked LED Rear Side Markers that I've got with me today make a very simple
but effective way to update the look of your S550.
These lights would go great with any tinted or blackout build and they ditched the factory
bulbs for a strip of bright and modern LEDs.
Now installing these is quite literally as simple as changing a light bulb.
So the install is a very soft one out of three wrenches on the difficulty meter.
It should only take about 10 minutes to do both sides.
Now, the nice thing about these side markers is their smoked look and their brightness.
The lenses themselves as you can see are pretty subdued.
They are much less prominent than the factory markers yet the LED strip inside is still
bright enough that it will look even brighter and more clear than the factory markers.
Now, these require no wiring.
Everything is prewired as you can see inside, so you do not need to splice or solder anything.
You're just pulling out the bulb from your factory harness and plugging these in.
And on that note, if your factory bulbs did go out, these are a nice replacement.
They will last about 100,000 hours.
Safe to say you will not ever have to replace these ever again as they will actually last
longer than the life of your Mustang.
And at 80 bucks, I think these are fairly priced.
Especially considering a pair of replacements from the factory will actually run you about
the same.
Now, if you need to replace, you might as well upgrade and if you're looking for some
simple styling while you are in the right place either way especially if you're already
running a pair of smoked headlights or taillights.
And again, getting these installed is very simple and I am actually gonna show you how
to do it.
So let's head over to the garage and get one of our S550s and take a look.
As we got our S550 in the garage here.
Now keep in mind, you can do this on the ground and you don't need any tools, but I'm gonna
actually put our car up on the lift so you can see inside the bumper cover.
I can show you exactly what you're working with.
And now we've got our car up on the lift.
Pulling the light out is very simple.
There's just a clip on the inside here.
You squeeze it with your finger and the light will pop out.
Now that the side marker's removed from the bumper cover, you're gonna pull the side marker
out from the bulb itself.
To do that, you're just gonna twist the wiring harness and the bulb will disconnect from
the marker itself.
And now with your factory side marker removed, you can go ahead and grab your new side marker.
They are marked for which side they go on, left hand for this side.
You're gonna pull out the bulb itself and you're gonna plug in the wiring end of your
LED from your new side marker into the original housing where the bulb was plugged in.
Keep in mind polarity does matter with the LED.
Meaning, if you plug it in one way and it doesn't work, unplug it, flip that little
connector and plug it back in and you should be good to go.
With the LED connected to the original bulb wiring harness, you can plug your side marker
back into your bumper cover and that will about do it.
You're just gonna repeat the same thing on the other side.
With that said, that actually wraps up my review and install of Vividline's Smoked LED
Side Markers fitting your S550.
I'm Travis.
Thanks for watching.
For all things Mustang, keep it right here at americanmuscle.com.
For more infomation >> Analua - Armandinho (Toca a Sua) Nossa Toca - Duration: 2:13. 
For more infomation >> Ganz wie Mama Kim: So hübsch ist Chicago West schon jetzt! - Duration: 0:48. 
For more infomation >> VÍKEND V BUDAPEŠTI | JUMP N TRAVEL X FREEMOVE - Duration: 5:06. 
No comments:
Post a Comment