hello world PDR coming at you here with a 2012 Mazda cx-9 cross truck kind of
car and it has kind of similar dead to that Subaru fender where it's not up on
the edge here but it's down on this lower edge it got bumped a little bit
and it even went into this bumper but there's nothing we can do for that what
we're gonna do is focus on this right here and so I think before getting it
really warm I did get it warm too got in there and I checked my access just
sneaking behind this little piece of plastic but I think before I do that I'm
gonna stick a couple real solid tabs on here and just try to maneuver some of
this metal out like right there yeah take this tab keep kind of the same
right about there you know that didn't have a secure push there's a little
piece of glue that was dried on the tab it wasn't perfectly clean so let's pull
this fairly quick little bit of movement now that glue will just come right off
the plastic no worries
and before going in there and actually make it a whole bunch of pushes I'd
prefer to just a little sure did cuz I had to push it in really hard and hey at
this point in the videos when I say I sure do appreciate everybody clicking on
this video I really do if you guys don't mind hitting that subscribe button and
becoming part of the community we sure appreciate it and I know we don't have
the microphone on today so I'm being kind of trying to look to be loud enough
and talk to you guys but also check the comment section or leave a comment
we always love that so two pulls in we got a lot of that one out a little
little guy in there then I'll end up tooling out with it with the tool
probably number one with just a straight metal to metal no no little squishy tip
needed I might even get my squishy tip in there no some a little dent craft
tool in there let's make another poll and I think this time I'm gonna do one
beat of glue and I'm just gonna come right through the middle like this that
area that we want to pull give it about five or ten seconds
see it's being held in from the bottom
one strip right down the middle drop it in there
and hope for the best give her about five or ten seconds cool
so it's not cold cold but it's uh you know not warm to the touch at all just
kind of it's probably about 50 55 degrees out not optimum for fur glue so
I can always just turn this on for a couple of seconds warm it up to about 70
where that glues the best
let's give it one more little pull it's already warming up a little bit let's
give it one more little pull here trying to keep you guys in for the most of the
part here of the majority of the work we might do a little super speedy this
thing is gonna take me a little bit of time but we want to keep you in for as
much as possible please excuse the background noise a little plane flying
overhead probably not a little one probably a large five four three two
have stayed on the tab in half staying on the car so that was almost
the perfect timing I guess it would be the perfect timing
because I like to leave the glue on the car so I can just do this and take it
off nice and easy wow that gave you a nice little pull and
so we'll probably end up doing guys is some of this might give it another
little pull up here but I think what I'm gonna do is uh turn on the heat gun and
get in here with some tools we'll do it with super speedy and then we'll come
back to you and show you the end result in just a bit
okay guys here's what we ended up with let's take a look down it it
straightened out pretty nice there's a little tug down here and obviously this
whole top got you know scraped through but I think for what we said we were
gonna do for it and what we did for it came out pretty good if you guys would
hit the hit us up with a like and uh you know throw a comment down below we
always love to see the comments we always love to see the subscriber count'
grow old and see the community grow so if you guys like what you see here
that's up with the lake and other than that I'll just say the thing there's
been PDR and I'm out peace
For more infomation >> Early Winter Weather Across The Country Causes Accidents And Commuter Chaos | NBC Nightly News - Duration: 1:47. 
No comments:
Post a Comment