USA news on Youtube Oct 23 2018

Use a combination spanner No.16. Use a drive socket No.15. Unscrew the stabilizer link upper fastening

Use a flat screwdriver Disconnect the ABS sensor cable fastener

Use a drive socket No.12. Use a Ratchet wrench. Disconnect the brake hose holder from the shock absorber strut

Use a combination spanner No.17. Use a drive socket No.21. Unscrew the lower fastener of the shock absorber strut

Disconnect the steering knuckle from the shock absorber strut

Use a flat screwdriver. Unscrew fixing bolts of the protective cover

Use a combination spanner No.18. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount

Use a combination spanner No.19. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount

Install the spring on the shock absorber

Compress the spring

Use a combination spanner No.19. Use a HEX bit No.H6. Unscrew the top fastening of the shock strut mount

Tighten the shock strut top mount. Use a combination spanner No.17. Use a HEX bit No.H6

Install the steering knuckle on the shock strut and tighten it. Use a combination spanner No.17. Use a drive socket No.21

Connect the brake hose fastener to the shock absorber strut. Use a drive socket No.12. Use a ratchet wrench

Connect the ABS sensor cable fastener

Tighten the stabilizer link upper fastening. Use a combination spanner No.16. Use a drive socket No.15

For more infomation >> Cómo cambiar la muelles en SUZUKI SWIFT 3 [INSTRUCCIÓN AUTODOC] - Duration: 5:58.

-------------------------------------------

10/23/18 11:44 AM (100, 6880 Bermuda Rd, Las Vegas, NV 89119, USA) - Duration: 0:10.

For more infomation >> 10/23/18 11:44 AM (100, 6880 Bermuda Rd, Las Vegas, NV 89119, USA) - Duration: 0:10.

-------------------------------------------

10/23/18 11:29 AM (6770 Bermuda Rd, Las Vegas, NV 89119, USA) - Duration: 15:10.

For more infomation >> 10/23/18 11:29 AM (6770 Bermuda Rd, Las Vegas, NV 89119, USA) - Duration: 15:10.

-------------------------------------------

Aula de Violão: 7 erros que 90% dos INICIANTES COMENTEM - Duration: 11:15.

For more infomation >> Aula de Violão: 7 erros que 90% dos INICIANTES COMENTEM - Duration: 11:15.

-------------------------------------------

DIY Stove Jack for Tent Wood Stove Kit - Duration: 1:37.

Hi guys, today we're going to show you our DIY Stove Jack Kit. You can see on

the back, that we've included pre-cut and pre-placed basting tape, to make it

easier to stick right on the tent for sewing. It includes these rain covers,

that when you get it, you'll just rip this off first thing, underneath you'll see

the stove jack. Now let's put the rain cover to the side, and take a look at the

stove jack, here it is. It's 10 by 14 inches, here's the flap, and right here is

where you'll cut the hole for your pipe. Here's an example picture, cut it to

whatever size you need, for your size pipe, and now I'll rip off the velcro

strip that will be placed onto the tent. Everything pre-cut and pre-made for you, so

this is the stove jack itself, this has the fire retardant material that will

not burn. Alright, we'll move that to the side, this is the square of soft velcro

that you'll actually stick right on the tent, so let's take off that basting tape,

you'll see that's the sticky part underneath, just show you a quick

overview of how you would install this, so you place the soft velcro square

directly on the tent, and you would sew around the perimeter of it a couple

times, cut a hole in the center and now you have a hot tent, and you can place the

stove Jack and the rain cover on whenever is needed.